View Distance Tweaks
View Distance Tweaks is a plugin that allows your server to have dynamic per-world view distances. The view distance of each world is adjusted in order to satisfy some condition: Either to keep the number of player-loaded chunks below some threshold (proactive mode) or to keep the TPS above some threshold (reactive mode).
The plugin can also adjust the worlds’ no-tick view distances in supported versions of Paper. The no-tick view distance can only be adjusted proactively.
To access the base command, users will need the
viewdistancetweaks.command.vdt permission node.
/vdt status - Display the view distance of each world, and the number of loaded chunks.
/vdt reload - Reload the plugin’s configuration.
/vdt set <view distance> [world] [--duration <minutes>] - Set the view distance of the given world (all worlds is not specified) for the given duration.
/vdt set-no-tick <view distance> [world] [--duration <minutes>] - Set the no-tick view distance of the given world (all worlds is not specified) for the given duration.
Since all servers have different capabilities / preferences for view distance, you will be required to configure the plugin before it is enabled. When you have edited the config to your liking, set the
enabled field to
true and restart / reload the server.
# Configuration for View Distance Tweaks. # Plugin page: https://www.spigotmc.org/resources/75164/ # Github: https://github.com/froobynooby/ViewDistanceTweaks # Please don't change this! version: 2 # Set this to true to enable the plugin. The plugin is initially disabled so that you can make changes to the config # appropriate to your server. enabled: false # How should we determine whether the view distance needs adjusting? Accepts three values: # * proactive : Adjust the view distance so that the player-loaded chunk count is always below a set threshold. # * reactive : Adjust the view distance in response to changes in the server's TPS. # * mixed : Be both proactive and reactive; prioritising decreasing the view distance over increasing. adjustment-mode: mixed # These settings are for the proactive adjustment mode. proactive-mode-settings: # Set this to the maximum chunk count your server can handle. The view distance of each world will be adjusted such # that the total number of player-loaded chunks is sitting as close to this value as possible. # * If you know your server can handle up to p many players with a view distance of d, a reasonable choice is to set # this to (2d + 1)^2 * p. # * As an example, 5780 is the number of player-loaded chunks for 20 players with a view distance of 8. global-chunk-count-target: 5780 # These settings are for the reactive adjustment mode. reactive-mode-settings: # Above what TPS should we consider increasing the view distance? increase-tps-threshold: 19.9 # Below what TPS should we consider decreasing the view distance? decrease-tps-threshold: 18.0 # These settings concern how we determine the TPS. # * Only touch these settings if you know what you're doing. tps-tracker-settings: # Over how many ticks should we collect tick durations for calculating the TPS? # * Setting this too high will make the TPS very slow to react to changes. # * Setting this too low will make the TPS volatile. collection-period: 1200 # By how much (in percent) should we allow the tick durations we use to calculate the TPS vary from the average # tick duration. # * This is used for smoothing the TPS; making sure it's not heavily affected by sudden large lag spikes, such as # those caused by garbage collections or world-saves. # * Setting this to 0 will mean your TPS will never change - don't do that. trim-outliers-to-within: 100.0 # We keep a history of TPS vs. player-loaded chunk count in order to better predict what the TPS will settle to after # increasing the view distance. tps-prediction: # Should we use TPS prediction when we are considering increasing the view distance? # * For example, we may be at 20 TPS with a view distance of 6, meaning we would consider increasing the view # distance to 7. However, if we saw that 10 minutes ago with a view distance of 7 we had 17 TPS, we would hold # off on increasing. # * Disabling this can lead to a back-and-forth game of increasing and decreasing the view distance every few # minutes - not ideal. enabled: true # For how long (in minutes) should we keep a TPS / chunk count history? history-length: 30 # Every how many ticks should we check whether the view distance needs to be updated? ticks-per-check: 600 # How many checks in a row that say to increase the view distance should be required before the view distance is # actually increased? # * This is useful as it guards against the following kind of case: A player leaves and the view distance is increased, # but the player returns three minutes later and the view distance is lowered to its previous value. # * Since increasing the view distance can cause lag-spikes for players with poorer connections, it is recommended to # keep this value relatively high. passed-checks-for-increase: 10 # How many checks in a row that say to decrease the view distance should be required before the view distance is # actually decreased? passed-checks-for-decrease: 1 # Should we send a message to the console when we change the view distance? log-view-distance-changes: false # These settings can be specified per world. If a world is not specified or if a setting is missing, it will use the # settings listed under the default section. world-settings: default: # What should the absolute minimum view distance be in this world? minimum-view-distance: 6 # What should the absolute maximum view distance be in this world? maximum-view-distance: 12 # Relative to the other worlds, how 'heavy' is a chunk on performance? # * For example: In the End dimension, about half of the chunks you encounter are void and so have very little # impact on performance. For this reason, you may want to set the chunk-weight of the End to 0.5. chunk-weight: 1 # These settings concern how we count the number of chunks in this world. chunk-counter-settings: # When two players are near each other, their view distances can overlap. Should we not double count the chunks # that are overlapping? exclude-overlap: true # world_the_end: # minimum-view-distance: 8 # maximum-view-distance: 10 # chunk-weight: 0.5 # These are additional settings that apply if you are using Paper as your server software. paper-settings: # These settings concern the no-tick view distance available in Paper 1.15.2+. # * Note: higher no-tick view distances are less heavy on the server as far as TPS goes. For this reason, there is no # option to adjust no-tick view distance based on TPS. no-tick-view-distance: # Should we adjust the no-tick view distance? enabled: true # Set this to the maximum number of chunks you want to be loaded by the no-tick view distance. # * Note: this only counts chunks that are outside of the standard view distance of a player, but within the # no-tick view distance of a player. # * If you know your server can handle up to p many players with a no-tick view distance of n and a standard view # distance of d, a reasonable choice is to set this to ((2n + 1)^2 - (2d + 1)^2) * p. # * As an example, 6720 is the number of chunks loaded by the no-tick view distance for 20 players with a no-tick # view distance of 12, and a standard view distance of 8. global-chunk-count-target: 6720 world-settings: default: # What should the absolute minimum no-tick view distance be in this world? minimum-no-tick-view-distance: 8 # What should the absolute maximum no-tick view distance be in this world? maximum-no-tick-view-distance: 16
The following placeholders can be used with PlaceholderAPI:
%viewdistancetweaks_view_distance% %viewdistancetweaks_view_distance_<world>% %viewdistancetweaks_no_tick_view_distance% %viewdistancetweaks_no_tick_view_distance_<world>% %viewdistancetweaks_chunk_count% %viewdistancetweaks_chunk_count_<world>% %viewdistancetweaks_tick_chunk_count% %viewdistancetweaks_tick_chunk_count_<world>% %viewdistancetweaks_no_tick_chunk_count% %viewdistancetweaks_no_tick_chunk_count_<world>% %viewdistancetweaks_global_chunk_count% %viewdistancetweaks_global_tick_chunk_count% %viewdistancetweaks_global_no_tick_chunk_count%
Some compatibility notes:
- View Distance Tweaks will not work on CraftBukkit, you need to be using at least Spigot.
- There are currently no plans to provide compatibility for older versions.